Since this topper is located on top of the mattress, it is exposed to spills, body oils, sweat or some other materials. All this affects the hygienic conditions. It should be emphasized that many models are made of materials that absorb much more moisture and cleaning products.
Therefore, it is necessary to be careful during the process. First it is necessary to take off and wash the bedding, and then vacuum the upper part of the topper in detail. After that, a thin layer of baking soda is applied over the entire surface and left to stand for as long as possible. Finally, the surface is vacuumed in detail to remove the baking soda and the procedure is repeated with the opposite side. Cleaning should be repeated as needed, and at least twice a year. If your mattress topper is not salvageable, visit the Sleep Advisors to find a great mattress topper that fits your needs.
Remove the bedding
Whether you opt for basic or deep cleaning, you need to remove the sheets, pillowcases, and mattress covers first. Our advice is to transfer it all to the washing machine and let it wash while you clean your mattress topper. Make sure to wash the topper at a higher temperature to remove all mites and dirt. Of course, the most important thing is to pay attention to the type of mattress topper and materials. Therefore, wash all bedding according to the manufacturer’s instructions.
Remove the topper from the mattress
After you have removed the bedding, you also need to remove the topper from the mattress. Be as careful as possible during this operation and place it on a flat surface. Since there are different materials, you must treat it gently so as not to damage it. When you have disposed of it properly, it is time to cover it with baking soda over the entire surface. It must take some time for the soda to start working and thus draw out all the unpleasant odours and moisture. For that, it is necessary for at least 8 hours to pass, but the more time passes, the better.
Vacuum the topper
When the baking soda stayed on the topper long enough, it needs to be completely removed. So, you will thoroughly vacuum the entire surface using a vacuum’s handheld attachment. This is a very simple and quick procedure that you will have to repeat after a while. It is usually recommended two to three times a year or as needed. That way the topper will always be fresh. It is advisable to vacuum the topper after each change of bedding to remove dust.
Spray a mixture of baking soda and water over the entire topper
In addition to applying baking soda in raw form, you can use a combination of water and baking soda. This combination is quite easy to apply and gives even better results, because you apply it more evenly. All you need to do is mix one part baking soda with two parts of cold water. This way you will be able to remove stains and neutralize the smell. Try rubbing this solution when you apply it directly on the stain, and then let it stand for half an hour. Then wet the cloth with water and remove this milky solution. Also wipe with a towel or paper towel to dry the surface.
Let it soak for 24h
An alternative that always works is to sprinkle baking soda directly on the stain and leave it to stand all day. The good effect of baking soda has long been known and is used for a lot of it. It has a universal application, because it copes very well with the most annoying stains and unpleasant odours. Since there are different mattress materials, it is not recommended to apply any agent on the surface. Otherwise, you can expose your mattress to damage, accumulation of moisture and even worse situations. Instead, simply set aside a few minutes, spread the baking soda evenly over the surface and leave it to act.
Vacuum it
Vacuuming comes at the end. In this way, you manage to remove all the remnants of baking soda, but also dust. After you have waited for it to work for 24 hours or wiped it with a combination of baking soda and water, it is necessary to leave the surface as clean as possible. It should be noted that vacuuming is not only provided in this situation, but also when changing the bedding. This way you will regularly clean your mattress from dust and everything else. It would be ideal to use an accessory that attaches to the vacuum cleaner and thus does the job even better.
Flip the mattress topper and repeat the process
Of course, everything you do with one side of the mattress needs to be repeated with the other. Only in this way will you be able to remove all the dirt and clean every part of the surface on which you sleep. Keep in mind how important this is for your health and peaceful sleep. Since this is a very simple process, you will not need much time for this. So, take off the bedding, remove the topper and sprinkle with baking soda. Depending on whether you will wait all day or half an hour, remove the residue after that and leave the surface to dry. It is best to open the windows to allow better air circulation.